Choose Language

Iroko: Milica Excels

Iroko is an exotic type of three, originated from African region. Because of its hardness it’s not very easy to work with. Its products are mostly used for as decks for wet areas, indoor parquet, outdoor wall surface deck and decorative wooden products. İroko panels are used in furniture making, stairs, kitchen worktops and wooden shelf. Panels can be produced with finger jointed (FJ) or solid lamellas using D4 or D3 glue.

Technical Description

Lengths:	80 cm - 300 cm
Widths:	85 mm -95 mm
Thickness:	18 mm - 25 mm

(Sapele) Entandrophragma Cylindricum

Sapelli is a kind of exotic wood originated from Africa. It’s a kind of hard wood but not very hard so it’s easy to work with. Its products are mostly used in furniture making, parquet and decorative wood works. Its panels are used as kitchen worktops, table tops and shelves. These panels can be produced with both FJ (finger jointed) and solid lamellas.

Technical Description

Lengths:	4500 mm ve altı
Widths:	1250 mm ve altı
Thickness:	15 mm - 50 mm

(Larch) Larix deciduas & Larix sukaczewii

This is a kind of wood that is mostly used in Europe. This is a crossbreed kind of three with several different kinds of pine. It’s a good alternative for expensive hardwood. It can be used as indoor parquet, outdoor wall surface deck and most of the woodworks especially for wooden windows. Best quality Larch comes from Siberia and central Europe. Larix Panels are used in furniture making, stairs, indoor/outdoor table tops and outdoor laminated wood beams. For the purpose of use D4, D3, polyurethane and melamine glue is used

Technical Description

Lengths:	80 cm - 600 cm
Widths:	80 mm - 120 mm
Thickness:	18 mm - 25 mm

(Oak) Quercus

It grows in many parts of Turkey. Because of its hard structure and strength in outdoor use, its suitable for wooden windows & doors, furniture, parquet and many more. Its panels can be produced with FJ (finger jointed) or solid lamellas with D3 and D4 glue. Panels are mostly used in stair tops, kitchen worktops and table tops.

Technical Description

Lengths:	4500 mm ve altı
Widths:	1250mm ve altı
Thickness:	18 mm - 50 mm

(Chesnut) Castanea

Blacksea, eagean, Istanbul and eastern parts of Antalya are the main areas for this tree. Its timber is very similar to oak. It has a hard structure but it’s also very flexible. It’s very resistant to deformation and easy to work with. It’s very strong against water contact. It’s mostly used for decorative purposes. Because of its strength against water it is also used as column of piers. Other than those it is also used in furniture making especially in furniture that has curvy structures.

Technical Description

Lengths:	4500 mm ve altı
Widths:	1250 mm ve altı
Thickness:	18 mm - 50 mm

Parquet Massive

Conventional first used parquet type. It made with cutting the qualified and dried woods 16-20 mm as thin layers and tapes. Sapelli, oak, larex, etc. woods used for made conventional parquets for durability. Conventional parquet called as “massive parquet”.

Practically, 16-18 mm thickness 3-13 width 20-100 cm lenght massive parquet pieces glues to floor with paste, if there spaces it retouches with emery dust and varnish mix, it smooths with sandpaper which has numbers from thick to thin and make prepared with furnishing.

We are offering economical products, boutique products, Project products to our customers as Akdeniz Orman. Massive Parquet’s the most important things are; being long-lasting, provide heat and sound isolation and can be scraped.